This CHAUVET DJ Freedom Par T6 Kit from B&H combines a set of four battery-operated Freedom Par T6 fixtures with a CHAUVET DJ FlareCON Air 2 transmitter/receiver. Each light contains six tri-colored LEDs and wirelessly runs for up to four hours thanks to their internal batteries. The FlareCON Air 2 remotely communicates through the built-in D-Fi protocol for complete lighting control or can be tethered to an external DMX controller via 3-pin XLR.
Lighting designers and event coordinators in search of a wireless, battery-operated PAR should look no further than the Chauvet DJ Freedom Par T6, a bright, powerful, and 100% wireless fixture well suited for special events, weddings, performance halls, and more. The fixture's six tri-colored LEDs (red, green, blue) are rated for 50,000 hours and will provide years of reliable service. An adjustable kickstand enables you to shine light directly where it is needed, while the built-in glare shield prevents light spillage. A magnetic diffuser attaches to widens the coverage area.
The Freedom Par T6 includes an integrated D-Fi transceiver to wireless DMX control with 3 control modes (3, 5, 13 channels). The rechargeable battery can be set to specific run times including 3, 5, 8, and 12 hours. Convenient, wireless non-DMX control is available using the optional RFC and RFC-XL remotes and customized colors can be created using the built-in LED display. The compact design allows the fixture to be placed inside trussing. The Freedom Par T6 ships with a power cord.
- 100% TRUE wireless, battery-operated, tricolor (RGB) LED uplight with built-in D-Fi transceiver
- New secondary optics provide perfect color blending with nearly no artifacts
- Magnetic diffuser pops on or off with ease and widens the coverage area
- Adjustable run times ensure the fixture will last the length of the event
- OLED display allows for full-text and to easily change fixture’s settings
- Built-in RF receiver for wireless control using the RFC or RFC-XL optional remotes
- Adjust the projection angle using the spring-loaded kickstand
- Built-in glare shield protects light spillage and eye fatigue
- Extend the fixture’s lifespan with the onboard charge and discharge protection circuitry
- Achieve smooth LED fading with built-in dimming curves
- Compact and lightweight design easily fits inside sticks of truss
The FlareCON Air 2 Transmitter/Receiver from CHAUVET is a compact, easy-to-use DMX unit that functions as either a transmitter or receiver. For more stable communication between units, it operates on a 2.4 GHz frequency range and includes an auto function that finds the best frequency and syncs the units effortlessly.
When FlareCON is used with a mobile device, it creates a wireless network (Wi-Fi) for receiving the signals from the mobile device, then sends D-Fi signals to a D-Fi or D-Fi-compatible hub. When FlareCON Air 2 is used with a DMX controller, it receives signals from the controller through a DMX cable. FlareCON Air 2 then sends D-Fi signals wirelessly to D-Fi-compatible lights and DMX signals via a DMX cable connected to any DMX-compatible product.